Bill of Materials

Quadcopter..

Please note all prices are in AUD.

Frame

• $2.15 M3 14mm Nylon Spacer
• $0.66 M3 Nylon Nut
• $0.85 M3 Nylon Bolt
• $1.77 Battery Strap
• $1.68 Vibration Mounting
• $1.97 Double Sided Tape

Motor Mounts

• $4.42 Hex Locknuts M2
• $2.34 Hex Screw M2x10mm

Blades

• $15.44 = ($1.93 * 8) 4 Spares 7 x 4.5 Three Blade Clock Wise and Counter Clockwise Pair

Frames

• $6.00 2 Acrylic Sheets

Optionally you could use this kit which comes with the motors so you can remove this from the final bill $41.64 ST360 Quadcopter Frame

Motors & Power System

• $47.50 = ($9.50 * 5) 1 Spare Motor 1000Kv Brushless Motor
• $52.45 = ($10.49 * 5) 1 Spare Electronic Speed Controllers Afro 12AMP
• $2.31 Bullet Connectors 2mm Connectors

Flight Controller

• $36.08 MultiWii MicroWii ATmega32U4 Flight Controller USB/BARO/ACC/MAG

Batteries

• $20.16 Turnigy 2200mAh 3S 40C You will also need a battery charger. This

Remote Controller

• $31.49 Cheap RC Controller Hobby King 2.4Ghz 6Ch Tx & Rx V2

Total

$221.27

Optionally Better Flight Controller

If you wanted a more robust experience I would buy a better flight controllers with more features, the following are better flight controllers.

• $69.29 HK Pilot - Open Source 8 bit its a full featured autopilot with waypoint capabilities
• $69.95 Naze32 Pilot - Open Source 32 bit processor.
• $279.98 3DR Pixhawk 32 bit More featured than the Naze 32 processor open source

Optionally Better RC Controller

If you wanted a better controller I recommend the following:

• $218.40 Taranis Open Source One of the best open Remote Controls